-
Characterisation of relaxation of residual stresses due to heat treatment in ...
Additive manufacturing, otherwise know as 3D printing is gaining in industrial relevance as a manufacturing technique partially due to the ability to fabricate complex... -
Residual stress measurements on cold expanded samples in the initial state an...
Surface treatments such as cold expansion are widely used in industry in order to introduce compressive residual stresses in the bulk of the material in the vicinity of holes,... -
Mapping the stress & phase evolution across the interface between dissimilar ...
Spray forming of thick claddings of dissimilar metallic alloys that have different material properties give rise to significant residual stresses developed across the interface... -
In-situ study of the deformation mechanisms involved during high temperature ...
The present work proposes to investigate the mechanisms of the hot and the superplastic (SP) deformation behaviour for a two-phase Titanium alloy (Ti-6Al-4V) that presents an... -
Residual Stress Measurements in Inc718 and C263 Nickel Based Super-Alloys and...
This project is being conducted at the Advanced Forming Research Centre (AFRC), funded by UK government through the Innovative UK (I-UK) initiative known as Manufacturing... -
Residual Stress Measurement of Bead-on-plate Weld Geometry for a P91 martensi...
The objective of our research programme is to study the microstructure and stress state evolution in the heat affected zone (HAZ) on welds of P91 and other 9Cr steels. The work... -
Contour Method to Measure Radial Residual Stresses: Experimental validation
The contour method has been increasingly recognised as a powerful technique for measuring residual stresses. However, the conventional contour method is limited to performing... -
Selective Laser Melting Induced Residual Stress in a Nickel-based Superalloy
Nickel-based superalloy is widely used in aerospace engine components for its excellent high-temperature performance. Because of the difficulty in producing superalloy... -
BrightnESS2 project round 1
This dataset has no description
-
Quantification of the Residual Stress Distribution in 316L Welded Austenitic ...
316L austenitic stainless steels are widely known for their corrosion resistance however they have been known to fail under specific conditions via stress corrosion cracking.... -
The inner workings of the earthquake cycle: New insight from microstructural ...
Identification of the mechanochemical processes occurring during fault slip is of fundamental importance to understand earthquake nucleation and propagation. We will use... -
IN SITU CHARACTERISATION OF INTERNAL STRESSES IN A CLAD PRESSURE VESSEL STEEL...
Nuclear reactor pressure vessels are safety critical components of pressurised light water reactors. They enclose the nuclear fuel rods, that contain the nuclear fuel (uranium... -
Fatigue crack propagation effect on the residual stress redistribution of las...
To improve the railway networks, track components with greater durability are essential. To this end, we clad a layer of premium material on railhead to reduce wear and the... -
Stress evolution of hydrogen charged duplex stainless steel under load
Duplex stainless steels have a microstructure composed of 50% ferrite and 50% austenite. This microstructure confers them high mechanical properties and corrosion resistance.... -
Residual Stress Measurements in Inc718 and C263 Nickel Based Super-Alloys and...
This project is being conducted at the Advanced Forming Research Centre (AFRC), funded by UK government through the Innovative UK (I-UK) initiative known as Manufacturing...
