The main objective of the work package 2 of the REFLECT project is to characterise relevant fluid properties and their reactions for saline fluids (type C). One of the specific goals was to collect fluid samples from several saline fluids from geothermal sites across Europe, determine their properties, and thus contribute to the Fluid Atlas (WP3). Additionally, the REFLECT team will compare those field data with data from lab experiments performed at near natural conditions.

Samples of type C fluids were taken from several sites in Germany, Austria, Belgium and the Netherlands. The samples were analysed for major and minor ions, dissolved gases and isotopes.

On 29th and 30th of April 2021 five thermal water samples were taken by Hydroisotop from five different springs/wells located at Wildbad-Einöd. The samples were analysed for hydrochemical composition, heavy metals and dissolved organic carbon (DOC) content. It can be noted that the bromide content of sample 361625 is much lower than the bromide content in the other four springs. Since the chloride content in all springs is the same order of magnitude and Cl/Br ratios are expected to be similar in the same

The dataset contains analysis results associated with the research project REFLECT. It is a comma separated file (csv) containing the following columns: Location,Country,Description,Laboratory (Lab.),Lab. No.,Sampling date,Temperature at sampling (degC),Spec. electr. conductivity (25 degC) at sampling (muS/cm),Spec. electr. conductivity (25 degC) Lab. (muS/cm),pH value at sampling,pH value Lab.,Temperature Lab. (degC),Dissolved oxygen content (mg/l),Redox potential (mV),Base capacity (pH 8.2) (mmol/l),Alkalinity (pH 4.3) on site (mmol/l),Alkalinity (pH 4.3) Lab. (mmol/l),Sodium (mg/l),Potassium (mg/l),Calcium (mg/l),Magnesium (mg/l),Ammonium (mg/l),Hydrogen carbonate (mg/l),Chloride (mg/l),Sulphate (mg/l),Nitrate (mg/l),Nitrite (mg/l),Bromide (mg/l),Fluoride (mg/l),Iodide (mg/l),Lithium (mg/l),Silicon (mg/l),Strontium (mg/l),Iron total (mg/l),Manganese total (mg/l),DOC (mg/l)

Methods are described in the accompanying deliverable Fluid data of geothermal sites (type C)

Project summary: The efficiency of geothermal utilisation largely depends on the behaviour of fluids that transfer heat between the geosphere and the engineered components of a power plant. The Horizon 2020 funded project REFLECT aims to avoid problems related to fluid chemistry rather than treat them. Fluid physical and chemical properties are often poorly defined, as in situ sampling and measurements at extreme conditions have proved difficult to date. Therefore, large uncertainties in current model predictions prevail, which are being tackled in REFLECT by collecting new, high-quality data in critical areas. The data is being implemented in a European geothermal fluid atlas and in predictive models to allow recommendations on how to best operate geothermal sites sustainably and to enhance geothermal technology development. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement nº 850626. Project website: https://www.reflect-h2020.eu/ Cordis website: https://cordis.europa.eu/project/id/850626